ZephyrS4

Exactly...I just wanted to make sure he wasn't trying to get that one out thinking it was the CTS.

Holographic77

So the first sensor in the pic is the CTS? or is it the one in the background?

Holographic77

What is shown in the picture? Where is the actually CTS? Underneath the 4 prongs??

Rory

after I removed the retaining plastic U-clip and the wire harness, the sensor was still stuck fast. I ended up gently (as possible) prising a flathead screwdrive in between the sensor and the lip of its base. Eventually, it started to come free.

By the way, the area around the sensor in my car (tip) didn't look the same as the photo posted by ZephyrS4: mine has additional hoses.

Rory

ZephyrS4

The CTS is the one with the 4 prongs.

ZephyrS4

backround

Holographic77

So is the actual CTS underneath that 4 prong connector (shown in the pic)?

4Bidden

The 4 prong connector is the CTS, its not underneath it.

S4Poor@Curbside

to figure out where it is? At this point if all of these posts haven't helped, I would call it quits. You're making this much harder than it is.

Holographic77

Nah, actually I am at work...trying to gather as much info as possible, before I tackle it!