PKmode

So when I turn on my indicators (lower or raise stalk) the light blinks at normal speed for a few blinks, then stops. Sometimes, it will keep going for a little bit (30 sec) but usally 2-5 blinks and it stops. WTF? If I hit the hazzards, they stay on. All bulbs and connections seem fine. Anyone got an idea? Your input is greatly appriciated. TIA

@wesome

hazard relay same as turn signal relay.. when you're having the problem.. tap the hazard switch

silva

replace your hazard switch, or take it apart and clean the contact surfaces, if you're so inclined.

papuc (MMI S4)

replace hazard. they are cheap.

PKmode

But the hazzards are working fine, it's only the turn signals/indicators that stop blinking.

papuc (MMI S4)

That doesn't matter. Trust me I had the same thing. Replaced the Hazard relay and it works perfect!

silva

the other for the 4-way hazard flashers. Since it is all part of the same switch, you have to replace it. I have repaired one of these before, but IMO its just easier to replace.

PKmode

Thanks for the help guys. I'll replace the hazzard relay.