oil cooler tube and o-ring seal
#1
Audiworld Junior Member
Thread Starter
Join Date: Sep 2007
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
oil cooler tube and o-ring seal
I tried to change the oil today. instead of the oil filter coming off the tube, I turned the oiler cooler tube out of
the oil pan.
to get the filter separated from the tube, I put a vice grips on the tube and f'd up the threads.
I took a look at the o-ring seal between the oil pan and oil cooler and it's very cracked.
does anyone have a bottom end?
I need the tube that goes through the oil cooler, connecting the filter to the oil pan. and I need the seal that goes between the oil cooler and the oil pan.
I have some pictures, but can't post them from my iphone
the oil pan.
to get the filter separated from the tube, I put a vice grips on the tube and f'd up the threads.
I took a look at the o-ring seal between the oil pan and oil cooler and it's very cracked.
does anyone have a bottom end?
I need the tube that goes through the oil cooler, connecting the filter to the oil pan. and I need the seal that goes between the oil cooler and the oil pan.
I have some pictures, but can't post them from my iphone
#2
The o-ring can be picked up pretty affordably at the dealer. I think jasonMD (not sure if that is the right name) is parting out a full engine and could get that tube for you.
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning-Audi
A4 (B7 Platform) Discussion
0
09-01-2015 09:16 AM
ECS Tuning-Audi
Audi A5 / S5 / RS5 Coupe & Cabrio (B8)
0
09-01-2015 08:27 AM