Reset S4 SAC pressure plate for new clutch?
04-27-2005, 10:22 AM
#1
New Member
Thread Starter
Join Date: May 2002
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Reset S4 SAC pressure plate for new clutch?
Anyone here know how to Reset S4 SAC pressure plate for new clutch? I have been playing around with my pressure plate but have totally no idea how to do it... Any picture would help a lot... Thanks
04-27-2005, 10:30 AM
#3
New Member
Join Date: Dec 2004
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Put in on a press and put pressure on the diaphram fingers, then rotate inner assembly...
with a couple screwdrivers so the small springs are compressed.
Question though, if the plate already has moved down the ramps, why do you want to reset it? Chances are the disk and pp surface have worn. If you reset the plate you better have a new or thicker clutch disk to compensate for the wear.
Question though, if the plate already has moved down the ramps, why do you want to reset it? Chances are the disk and pp surface have worn. If you reset the plate you better have a new or thicker clutch disk to compensate for the wear.
04-27-2005, 10:32 AM
#4
New Member
Thread Starter
Join Date: May 2002
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Re: Why wouldn't you replace the pressure plate?
Don't need... In fact... I am asking this question for my RS4. They both have SAC system on their pressure plate anyway... Do you have any idea how to reset the pressure plate for new clutch plate?
04-27-2005, 10:45 AM
#6
New Member
Thread Starter
Join Date: May 2002
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Re: Put in on a press and put pressure on the diaphram fingers, then rotate inner assembly...
any chance that anyone have bentley repair guide pics that shows how to do that.
It is very hard to press down the pressure plate by hand... How to do that??
It is very hard to press down the pressure plate by hand... How to do that??
Trending Topics
04-27-2005, 10:50 AM
#8
New Member
Thread Starter
Join Date: May 2002
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Re: Put in on a press and put pressure on the diaphram fingers, then rotate inner assembly...
"put it on a press"?? do you mean put the pressure plate on a machine that do the press???
Thread
Thread Starter
Forum
Replies
Last Post
WTurkey S4
S4 / RS4 (B5 Platform) Discussion
1
03-26-2007 09:18 PM
1bads4
S4 / RS4 (B5 Platform) Discussion
8
04-20-2004 06:02 AM
