rs4 intake cams. yay or nah?
#1
AudiWorld Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
Any downside to these?
running k04/rs6 brids, and the usual supporting mods.
After getting fooked by these revolvers im a little skittish about cams.
I have to pull my stock cams out again to fix my blown lifters so nows the time to decide.
running k04/rs6 brids, and the usual supporting mods.
After getting fooked by these revolvers im a little skittish about cams.
I have to pull my stock cams out again to fix my blown lifters so nows the time to decide.
#5
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I want to get the cams (and the techtonics exhaust and aps fimc) installed before having the custom tuning done.
Trending Topics
#8
AudiWorld Senior Member
Thread Starter
Join Date: Jan 2005
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
im also not sure i trust the timing angle difference.
Ill give you a ring tommorow to discuss.
Ill give you a ring tommorow to discuss.
#9
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
The 2.8 heads have the same intake port size as the RS4... And they are easily available in the US...
Get them machined for a 3-angle valve setup, replace the exhaust valves with the sodium filled S4 ones and you're way ahead of the game!
Best wishes,
RamĀ®
347-866-1120
Get them machined for a 3-angle valve setup, replace the exhaust valves with the sodium filled S4 ones and you're way ahead of the game!
Best wishes,
RamĀ®
347-866-1120