LI-S4

I am going to install the Samco hoses this weekend...

I will be purchasing the <a href="http://www.aircraftspruce.com/catalog/appages/oetiker.php">Oetiker - CT clamps</a> for those hoses that are HP, and regular stainless clamps for those that are LP.

I can use help identifying which hoses are which... Obviously, the TBB, F-Pipe and BPV hoses are easy... I won't need the TBB or F-Pipe.

What I need to know, before ripping everything out, is which hoses are HP and which are LP so I can purchase the correct clamps...

I've calipered all the hose ends and have a list of all the inlet/outlet sizes and have sources for the clamps...Can someone who can identify the hoses by eye, tell me Hose # and HP or LP?

<img src="http://images10.fotki.com/v209/photos/4/43687/1652609/1075_x6002-vi.jpg">

internecine

1234 are HP

DAP@EPL

I think #8 are the only pre-turbo (low pressure) hoses.

Mark P

where do 5 &amp; 6 go?

DAP@EPL

I believe 5 &amp; 6 are from the turbo outlets to the hardpipes leading to the IC hoses.

LI-S4

A HUGE help btw!!!

DAP@EPL

Probably not. Some of those hoses are pretty tough to get to... might not have room for CT clamps.

lemieux@curbside

driver side turbo does not have that 90 degree elbow ..

<img src="http://pictureposter.audiworld.com/47312/progress.jpg">

<img src="http://pictureposter.audiworld.com/47312/engdrop12.jpg">

AKS4

wouldnt happen to have a nice clean shot under the car showing both?

davenew

<img src="http://dave-new.com/S4/compressor_hoses/Mvc-509x.jpg">

<img src="http://dave-new.com/S4/compressor_hoses/Mvc-414x.jpg">

<img src="http://dave-new.com/S4/compressor_hoses/Mvc-412x.jpg">

Good luck installing those two hoses<ul><li><a href="http://dave-new.com/S4/compressor_hoses/">http://dave-new.com/S4/compressor_hoses/</a></li></ul>