Nick Gustas

<a href="http://tychl.txf.com/42lbdelphi/42lb%20delphi1.AVI">vid</a>

Still a bit of a pencil, but, again, they may not be the same part.

<img src="http://tychl.txf.com/42lbdelphi/delphi-pattern.jpg">



Stopwatch timed flow difference between AWE supplied green tops and the delphis.

<img src="http://tychl.txf.com/42lbdelphi/injector-difference.jpg">

more stuff

<img src="http://tychl.txf.com/42lbdelphi/injector-lineup.jpg">
<img src="http://tychl.txf.com/42lbdelphi/injector-side.jpg">


Nozzles have no orientation.
<img src="http://tychl.txf.com/42lbdelphi/nozzles-unaligned.jpg">

close up of the spreader.

<img src="http://tychl.txf.com/42lbdelphi/stream-spreader-nozzle.jpg">


again, these are <b>NOT</b> ASP supplied delphis, not even sure if they are the same part, but they are 42lb delphis, and look very close, got PN? these are 01D030B

jwolf::ASP S3

3.5 avg FATS, 3.43 best, 2people 1/2 tank, 25F

LaserK04

I've worked with a few AWE kits and boost is a bit lower, 19 psi is what I typically see sustained.

Arcteryx::Stock Rods

thank you.

iconoclast

should clear up a lot of questions. i know it did for me.