Torctite exhaust clamps - I just bought two
#11
AudiWorld Expert
![](https://www.audiworld.com/forums/images/ranks/guru2.jpg)
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
here's the APR clamp:
<img src="http://ctny.audiworld.com/mark/s4/exhaust/dsc04814.jpg">
The ones you're getting:
<img src="http://www.torcausa.com/images/products/tortitfin.jpg">
T Clamp from summitracing:
<img src="http://static.summitracing.com/global/images/prod/large/sup-094-2000_w.jpg">
<img src="http://ctny.audiworld.com/mark/s4/exhaust/dsc04814.jpg">
The ones you're getting:
<img src="http://www.torcausa.com/images/products/tortitfin.jpg">
T Clamp from summitracing:
<img src="http://static.summitracing.com/global/images/prod/large/sup-094-2000_w.jpg">
#12
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
The band clamps (dynomax, jcwitney, etc) are much wider so it covers the whole joint including the overlap. And the band material is thinner so it deforms and stretches somewhat to the shape of the exhaust pipes.
#14
AudiWorld Super User
Thread Starter
Join Date: Feb 2004
Posts: 7,825
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
My exhaust has been pivoting at the pipe joint, instead of the flex connections, as it should. THat causes it to rattle against the heat shield during decel.
The T clamps have the hollow rolled metal that bent, allowing the clamp to loosen. It appears to be cheap galvanized steel. I'm afraid I can't apply more torque on the nut without causing it to bend even more.
One of the APR nuts galled when I removed them and the bolt broke. The center piece broke in half on the other clamp. Hopefully, the "reaction block" will give the clamp ear more leverage to tighten the clamp. I also figured the longer clamp would help to stiffen the pipe joint.
Sorry for the false lead on the T-clamps. I just recently realized the problem.
The T clamps have the hollow rolled metal that bent, allowing the clamp to loosen. It appears to be cheap galvanized steel. I'm afraid I can't apply more torque on the nut without causing it to bend even more.
One of the APR nuts galled when I removed them and the bolt broke. The center piece broke in half on the other clamp. Hopefully, the "reaction block" will give the clamp ear more leverage to tighten the clamp. I also figured the longer clamp would help to stiffen the pipe joint.
Sorry for the false lead on the T-clamps. I just recently realized the problem.
#15
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
i mean you can get those clamps online for dirt cheap at a lot of stores.
check the link for an example. they sell 3" as well. use high temp gasket sealer on the joints as well just to be sure that it doesnt leak. I used these on my car for almost 4 years with no problems ever.
run the search in this link and scroll down for all your exhaust clamp needs<ul><li><a href="http://store.summitracing.com/partdetail.asp?autofilter=1&Ntt=exhaust+band+c lamp&N=4294919985">clamps</a></li></ul>
check the link for an example. they sell 3" as well. use high temp gasket sealer on the joints as well just to be sure that it doesnt leak. I used these on my car for almost 4 years with no problems ever.
run the search in this link and scroll down for all your exhaust clamp needs<ul><li><a href="http://store.summitracing.com/partdetail.asp?autofilter=1&Ntt=exhaust+band+c lamp&N=4294919985">clamps</a></li></ul>
Thread
Thread Starter
Forum
Replies
Last Post
beejohn
A4 (B5 Platform) Discussion
10
09-25-2007 05:21 AM
Mike Desi
Audi Original "S" Cars
2
10-04-2005 06:23 AM
davenew
S4 / RS4 (B5 Platform) Discussion
20
02-26-2005 09:33 AM
EDness
A4 (B5 Platform) Discussion
1
07-23-2003 12:23 PM
Well my APR exhaust showed up today...noticed the clamps are even larger than I remember which bring
James R.
A4 (B5 Platform) Discussion
11
12-12-2001 05:04 AM