Moto626

Hi!
Please help!
I loose one of the connection cables of RSnav s4 pro (8.8 for audi a4 b8.5)

It is cable from 10 Pin (concert video cable) to RSNAV head Unit (like on a photo)

I think, no chance to purchase new one from RSNAV

Can anyone tale a picture of this cable?
I think it is possible to renew it by myself

without this cable, no connection with canbus and other car functions((

SMac770

"I think, no chance to purchase new one from RSNAV", did you ask them?

The RSNAV device and the MMI 3G display have HSD connectors. The Concert display has a 10-pin connector. Sure, you could source the 10-pin connector and the HSD connector and do the wiring. But do you have the pinout of how the wires were assigned? It has nothing to do with CAN; that's on the quad-block connector.

Moto626

Yes, I have the pinout of the original 10-pin connector from Concert.
However, from RSNAV there is a 4-pin green(or blue ) LVDS type.

I need the pinout of which wires go from the green connector of the RSNAV device to connect correctly.

This is 10 pin from Concert



It is RS nav ports... This blue/green port

Moto626

yes, i asked a few weeks ago and no chance to buy this cable or information about scheme.

Moto626

I know, only:
for MMI 3g, needs only regular lvds cable (extender)

SMac770

Hopefully someone with RSNAV with Concert can work out the pinout for you. It would be RSNAV information, not Audi information, so not something one can look up in the workshop manuals.