Ack! Worldwide Carbon Fiber shortage...>>
02-15-2006, 12:54 PM
#26
AudiWorld Uber User
Thread Starter
Send Money!..>>
I only have one available immediately. Otherwise I'd have a garage full if I put one away for everyone who SAID they wanted one............:=)
02-15-2006, 12:59 PM
#27
AudiWorld Uber User
Thread Starter
Oh No!........>
Please, not a mold of a mold....:-)
On reinforcing just take it off and start laminating in pieces. Scored and scrimmed Balsa would conform easily to the contours and make it very strong...(cored sandwich construction)
On reinforcing just take it off and start laminating in pieces. Scored and scrimmed Balsa would conform easily to the contours and make it very strong...(cored sandwich construction)
02-15-2006, 01:52 PM
#29
AudiWorld Super User
Join Date: Oct 2000
Posts: 10,540
Likes: 0
Received 0 Likes
on
0 Posts
Ok that sounds real good with the balsa
easier to work with then metal. Someone already backed into it and cracked it right by the grille, so I needed to repair that and at the same time give it some strength- just want it to have some strength or flex like the OEM has.
Also thinking I might go and buy a used 1.8 front to use in the winter. The GT2 is going to be great for 3 season, especially since I am having 2 large side mount IC's built to fill the areas, then doing the oil cooler in the center, should help the radiator too.
My GT2 though fits perfectly now though since it has been modified- thank GOD I know the shop owner well, cause that could have been VERY costly as you know
That is why they were thinking of using mine for a mold since it slides right on and off- plus uses the OEM mounting pieces now- had them build them in when modifying it. But I am not going that route so no more molds of molds of molds
Also thinking I might go and buy a used 1.8 front to use in the winter. The GT2 is going to be great for 3 season, especially since I am having 2 large side mount IC's built to fill the areas, then doing the oil cooler in the center, should help the radiator too.
My GT2 though fits perfectly now though since it has been modified- thank GOD I know the shop owner well, cause that could have been VERY costly as you know
That is why they were thinking of using mine for a mold since it slides right on and off- plus uses the OEM mounting pieces now- had them build them in when modifying it. But I am not going that route so no more molds of molds of molds