AEZ / Edge Racing SEMA 2000>>>>Look at our choice for project vehicle!>>>>&g
11-08-2000, 06:06 AM
#1
Member
Thread Starter
Join Date: Aug 2000
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
AEZ / Edge Racing SEMA 2000>>>>Look at our choice for project vehicle!>>>>&g
<center><img src="http://pictureposter.audiworld.com/AudiWorldPics/2000/DSC00011%20Web.jpg"></center><p>Waazzzaahhhh!
Finally back after 10 days @ Vegas due to the 2000 SEMA Show!
We had a good time, but we had a LOT of work.
As you can see, our show vehicle was a beautiful 2001 Audi TT Coupe 225Q (representing
) with a few add-ons. It was good to show such vehicle because it gave us loads of attention and compliments, the funniest being "WOW that's a sharp looking bimmer!"
I would like to thank our participating sponsors for helping us build this vehicle, so here is a list of the stuff that the Audi has and where did we got it from:
Chip------------PES---------------908-806-8426
Suspension------HPA Motorsport----604-530-3715
Air Induction---Pipercross / ER---954-217-2980
Exhaust---------SGI / ER*---------954-217-2980
Body Styling----SGI / ER*---------954-217-2980
Wheels----------AEZ / ER*---------954-217-2980
*ER stands for EDGE RACING...which is us.
The following is a review of the products:
Chip/PES www.pes-tuning.com
Excellent product, it is incredible that such a simple bolt-on could change the personality of this car so much. It woke-up the low end of the RPM and gave it more power throughout the power band. Unfortunately I could only enjoy it flawlessly for about 25 minutes of HARD driving because the stock DV died. Fortunately I am getting a replacement in two days, again supplied by the guys @ PES. Check their website for more information about their own valve (no plastic diaphragm). I will post my comments as soon as I have the opportunity.
Suspension/HPA Motorsport www.hpa-motorsport.com
Just like the chip, all I have to say is excellent! What an upgrade. I was expecting a harsh ride with 40/35 series tires and about a 2.5" drop, but this coil-over suspension is incredible. I have scared a few of my passengers when I show them what this TT can do.
Air Induction/Pipercross www.edgeracing.com
This is the first TT "Induction Kit" by Pipercross. These filters are manufactured in England and pack excellent quality in fit/finish. They are very involved in racing and will be offered to you by us EDGE RACING and our dealers shortly. I will let you know when the information is posted on our website, but you can all bet that we will have extensive Audi fitments.
Exhaust/ SGI www.edgeracing.com
Bolt-on, no welding no cutting. Full stainless mounted on factory mounts. It is a quiet exhaust system compared to other aftermarket manufacturers. Much lighter than the stock unit, and it gets rid of all the "pressed tube" parts from the cat to the back. SGI is also available through EDGE RACING and our dealers.
Body Styling/ SGI www.edgearacing.com
This Body Kit gives the TT a much more aggressive stance, as you can see in this picture (and the other ones will be posted shortly). The front is supposed to have bigger side intake openings, we where not able to do it correctly because our body shop thought that the kit required no cutting, so they modified the front pieces instead of the car.
The wing... initially I was planning on taking it off after the show (the catalog pictures don't do it any justice) since no drilling was necessary (it simply slid over the little factory one), but the more I saw it the more I liked it. It may stay there.
Wheels/ AEZ www.aez-usa.com
On one side AEZ Bimo 19x8.5, on the other AEZ Simas X 18x8.5 Front 18x10 Rear. No rubbing at all. My personal choice Simas X because it fills the rear fenders beautifully. I'll post a close-up picture shortly.
Enjoy the pictures, and let me know if you have any questions/comments via forum, e-mail, or phone.
See ya!
MAX
EDGE RACING
800-489-5353
954-217-2980
MAXTT@aez-usa.com<ul><li><a href="http://www.aez-usa.com">http://www.aez-usa.com</a</li></ul>
Finally back after 10 days @ Vegas due to the 2000 SEMA Show!
We had a good time, but we had a LOT of work.
As you can see, our show vehicle was a beautiful 2001 Audi TT Coupe 225Q (representing
) with a few add-ons. It was good to show such vehicle because it gave us loads of attention and compliments, the funniest being "WOW that's a sharp looking bimmer!"I would like to thank our participating sponsors for helping us build this vehicle, so here is a list of the stuff that the Audi has and where did we got it from:
Chip------------PES---------------908-806-8426
Suspension------HPA Motorsport----604-530-3715
Air Induction---Pipercross / ER---954-217-2980
Exhaust---------SGI / ER*---------954-217-2980
Body Styling----SGI / ER*---------954-217-2980
Wheels----------AEZ / ER*---------954-217-2980
*ER stands for EDGE RACING...which is us.
The following is a review of the products:
Chip/PES www.pes-tuning.com
Excellent product, it is incredible that such a simple bolt-on could change the personality of this car so much. It woke-up the low end of the RPM and gave it more power throughout the power band. Unfortunately I could only enjoy it flawlessly for about 25 minutes of HARD driving because the stock DV died. Fortunately I am getting a replacement in two days, again supplied by the guys @ PES. Check their website for more information about their own valve (no plastic diaphragm). I will post my comments as soon as I have the opportunity.
Suspension/HPA Motorsport www.hpa-motorsport.com
Just like the chip, all I have to say is excellent! What an upgrade. I was expecting a harsh ride with 40/35 series tires and about a 2.5" drop, but this coil-over suspension is incredible. I have scared a few of my passengers when I show them what this TT can do.
Air Induction/Pipercross www.edgeracing.com
This is the first TT "Induction Kit" by Pipercross. These filters are manufactured in England and pack excellent quality in fit/finish. They are very involved in racing and will be offered to you by us EDGE RACING and our dealers shortly. I will let you know when the information is posted on our website, but you can all bet that we will have extensive Audi fitments.
Exhaust/ SGI www.edgeracing.com
Bolt-on, no welding no cutting. Full stainless mounted on factory mounts. It is a quiet exhaust system compared to other aftermarket manufacturers. Much lighter than the stock unit, and it gets rid of all the "pressed tube" parts from the cat to the back. SGI is also available through EDGE RACING and our dealers.
Body Styling/ SGI www.edgearacing.com
This Body Kit gives the TT a much more aggressive stance, as you can see in this picture (and the other ones will be posted shortly). The front is supposed to have bigger side intake openings, we where not able to do it correctly because our body shop thought that the kit required no cutting, so they modified the front pieces instead of the car.
The wing... initially I was planning on taking it off after the show (the catalog pictures don't do it any justice) since no drilling was necessary (it simply slid over the little factory one), but the more I saw it the more I liked it. It may stay there.
Wheels/ AEZ www.aez-usa.com
On one side AEZ Bimo 19x8.5, on the other AEZ Simas X 18x8.5 Front 18x10 Rear. No rubbing at all. My personal choice Simas X because it fills the rear fenders beautifully. I'll post a close-up picture shortly.
Enjoy the pictures, and let me know if you have any questions/comments via forum, e-mail, or phone.
See ya!
MAX
EDGE RACING
800-489-5353
954-217-2980
MAXTT@aez-usa.com<ul><li><a href="http://www.aez-usa.com">http://www.aez-usa.com</a</li></ul>
11-08-2000, 06:10 AM
#2
Member
Thread Starter
Join Date: Aug 2000
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
pic 2
<center><img src="http://pictureposter.audiworld.com/AudiWorldPics/2000/DSC00015%20Web.jpg"></center><p>Simas X side<ul><li><a href="http://www.aez-usa.com">http://www.aez-usa.com</a</li></ul>
11-08-2000, 06:13 AM
#3
Member
Thread Starter
Join Date: Aug 2000
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
pic 3
<center><img src="http://pictureposter.audiworld.com/AudiWorldPics/2000/DSC00013%20Web.jpg"></center><p>Simas X 18x10<ul><li><a href="http://www.aez-usa.com">http://www.aez-usa.com</a</li></ul>
11-08-2000, 06:16 AM
#5
Member
Thread Starter
Join Date: Aug 2000
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
pic 4
<center><img src="http://pictureposter.audiworld.com/AudiWorldPics/2000/DSC00005%20Web.jpg"></center><p><ul><li><a href="http://www.aez-usa.com">http://www.aez-usa.com</a</li></ul>
11-08-2000, 06:23 AM
#7
Member
Thread Starter
Join Date: Aug 2000
Posts: 1,169
Likes: 0
Received 0 Likes
on
0 Posts
Ooops
Forgot to mention the STONGARD guys!
Front Protection/ STONGARD www.stongard.com
This product looks so good because you can't see it! The kit comes pre-cut for an exact fit. Also i would like to mention that they already have a kit for the SGI body parts that we sell; front skirt, side skirt and eyelids!
Give them a call for more info
MAX<ul><li><a href="http://www.aez-usa.com">http://www.aez-usa.com</a</li></ul>
Front Protection/ STONGARD www.stongard.com
This product looks so good because you can't see it! The kit comes pre-cut for an exact fit. Also i would like to mention that they already have a kit for the SGI body parts that we sell; front skirt, side skirt and eyelids!
Give them a call for more info
MAX<ul><li><a href="http://www.aez-usa.com">http://www.aez-usa.com</a</li></ul>
