Any Dahlback users have problems using the MOFO?
#1
AudiWorld Super User
Thread Starter
Join Date: Nov 2001
Posts: 2,025
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
My block 032 never settled in properly and I kept changing MAFs thinking that was the issue. With the suggestion of boostedTT, I changed back to the OEM housing and lo and behold its perfect again. I used to have soft limp under WOT and now its perfect. My 032 settled to -2.4% when it used to go up to around 12-14. It could just be my car and me doing something wrong, hence why I want to know if anyone with the Dahlback chip is using the **** with no problems.
#2
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
that Dahlback fueling requirements, and agressive tuning can be hit or miss with Steve's stuff....your programming just may be too agressive for the ****....
btw- you running a 4 bar FPR?
btw- you running a 4 bar FPR?
#4
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
you were running a 3bar??? If so, that is your problem...lean conditions. 4 bar would prevent that, or an adjustable FPR....the car may run a bit rich, but that is to prevent detonation, and it is only on the top end. Do you have any VAG run numbers with a 4bar?