Greyhaven7

I know this is a repost, but I'm really proud of myself!

Here's the steps.

Start

<img src="http://pictureposter.audiworld.com/58264/dscf0103.jpg">

fiberglass application

<img src="http://pictureposter.audiworld.com/58264/fiberglass1.jpg">

sand like crazy...

<img src="http://pictureposter.audiworld.com/58264/sand_fiberglass.jpg">

then...
body filler application 1

<img src="http://pictureposter.audiworld.com/58264/bodyfiller1.jpg">

sand like crazy... then...
body filler application 2

<img src="http://pictureposter.audiworld.com/58264/bodyfiller2.jpg">

sand, sand, touch up, sand, touch up, sand...

<img src="http://pictureposter.audiworld.com/58264/done1.jpg">

<img src="http://pictureposter.audiworld.com/58264/done2.jpg">

<img src="http://pictureposter.audiworld.com/58264/done3.jpg">

It took about 36 hours from start to finish, that's including sleeping, and letting each layer dry, eating, a fishing trip, trip to the grocery store, etc...

not too terribly hard. it needs a little more touchup to get the curves EXACTLY perfect, but I'd say I have another hour or two work on it then that part will be done and I can move on to fitment when the bodyshop is done with the rear.

AxeYrCat

Damn. Nice work!!

YosemyTT

Repost! :-p

Greyhaven7

You hush up now, I'm bragging! =P

AvantMnkyA4

Nice work!!

peteypab

looks professional to me! where did you get that bumper from anyways? im interested

Greyhaven7

thanks for the compliment! I got it off e-bay.

Basttion

how did you get it white again? And why did you? Is that necessary and if so why? TIA

Greyhaven7

using the reflections of very straight edges to check the curvature to make sure it was perfect. not 100% necessary, but very helpful. I'll be sanding it off with very fine sandpaper before it actually goes in for paint.