Black BeauTTy

I don't know why I waited so long to do this. I've always disliked the OEM bulky blade assembly, this is a far cleaner look. They work great too, lots of rain around here to test.
<img src="http://pictureposter.audiworld.com/84508/aero_wipers_001.jpg">

Death sTTar

Looks good. What are the blade lengths again-21, 21 or 21, 22?

Black BeauTTy

They are both 21's. Works perfect. They are nearly invisible from the cockpit.

Death sTTar

Great, thanks. I'm going to be ordering some new blades soon.

AkRascal

They do look good, where did you get them?

audiologisTT

PITA to get the old wiper arms off
cheapo gear pullers (and wiper arm pullers)
were worthless.

Used a heavy duty powersteering pump puller
THAT did it in a second!

Very happy so far but the passenger blade isn't tight on the windshield at the very edge. Seems that a blade 1" shorter may work better

I agree that it looks MUCH better
Also seems to work better at speed (less lift, tighter on windshield), esp for the driver's side.

Cheers!

PS. I got mine from ecstuning.com. Superfast shipping and excellent customer service. Thanks Jason!!!<ul><li><a href="http://www.ecstuning.com/stage/edpd/pagebuild_v2.cgi?searchstring=wiper&amp;searchqt=b yvehicle&amp;make=Audi&amp;model=TT&amp;submodel=Q uattro&amp;engine=225HP">aero wipers from ECS</a></li></ul>

AkRascal

Thanks for the link

Black BeauTTy

a friggin prybar, block of wood, squirt of WD-40 and brut force! Found it to be easier with the wiper in the up position...took some of the torque off the connection.

Black BeauTTy

Your probably right though, an inch shorter would be right on the money. A little short on top though would be the trade off. I'll stick with the flying edge!