Replaced MAF-->still no boost :-(
#1
AudiWorld Super User
Thread Starter
Join Date: Mar 2002
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Replaced MAF-->still no boost :-(
Last week, I was driving along and suddenly the car lost a majority of its boost. Feedback from the forum led me to believe that it was a dead MAF. BTW, the CEL was thrown. I don't have a vag-com so I went on a whim and swapped out the VW MAF in hopes that that was the problem. Nope. Car still feels the same, it's like it's not hitting the high boost between 3-4k rpm anymore, it's just flat. Anyone have any suggestions or ideas, PLEASE!? I have Revo SPS3 and Hyperboost HX DV.
#3
did you clear the CEL?
it will stay in limp mode until you clear it out. you can pull fuses 10,12,29 and that will get you out of limp. However, as Steve discovered, it will not reset your adaptation values. with a new maf, they should correct themselves though.
Trending Topics
#8
AudiWorld Super User
Thread Starter
Join Date: Mar 2002
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
which fuses exactly?...
You said 10, 12, & 29 but they indicate that for those fuses, the fuse amp numbers are 15 and 7.5 but there are like 50 of the 15's, like a ton of bright blue 15's and a couple smaller dark green 15's. I think there are only a couple 7.5's. Do I need to pull them all out??
#10
no, no, those are the position numbers of the fuses...
there should be a "map" on the panel or in the owners manual that show you where they are. They are the fuses that represent the OBD system and engine timing.