REVO and PFLOW
06-15-2006, 11:44 PM
#1
New Member
Thread Starter
Join Date: Jun 2006
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
REVO and PFLOW
I just got REVOed. boost spikes 22 holds at 20 for a bit then drops to 15 and holds with stock airbox.
Today I installed a PFlow intake and now boost spikes at 16 and holds at 11...... not sure whats up with that any ideas? BTW the car is running cooler and I checked all connections.
Update I changed the boost setting on SPS 3 to 6 and now I spike and hold at 15. I'm running 91 gas.
What settings are people using on REVO wiht 91 gas?
Today I installed a PFlow intake and now boost spikes at 16 and holds at 11...... not sure whats up with that any ideas? BTW the car is running cooler and I checked all connections.
Update I changed the boost setting on SPS 3 to 6 and now I spike and hold at 15. I'm running 91 gas.
What settings are people using on REVO wiht 91 gas?
06-16-2006, 08:26 AM
#7
Rest In Peace
Join Date: Jun 2000
Posts: 24,689
Likes: 0
Received 0 Likes
on
0 Posts
connect vag...log block 2 or 3 for g/sec across MAF>>.
if it is anything less than 160g/sec on a 225 TT....then it is bad..on a 180, its about 140g/sec.
All logging needs to be done while car is moving...
All logging needs to be done while car is moving...
Thread
Thread Starter
Forum
Replies
Last Post
leosphere
A4 (B5 Platform) Discussion
9
08-18-2005 01:48 PM
ivansis
S4 / RS4 (B5 Platform) Discussion
7
09-20-2001 06:34 PM
