Samco Turbo inlet pipe on 2001 225Q without ESP?
02-02-2004, 05:02 AM
#2
Member
Join Date: Dec 2003
Posts: 3,035
Likes: 0
Received 0 Likes
on
0 Posts
There have been a couple of posting about it. Looks like it just needs some extra hose to reroute
some fittings. Here is a post from Juliem on it.<ul><li><a href="https://forums.audiworld.com/tt/msgs/897170.phtml">https://forums.audiworld.com/tt/msgs/897170.phtml</a</li></ul>
02-02-2004, 09:11 AM
#5
Member
Join Date: Jan 2001
Posts: 2,323
Likes: 0
Received 0 Likes
on
0 Posts
Here is what you will need...
All that is needed to make the Samco intake hose work is two jumper hoses.
A 10" length of 3/4" OD hose and a fitting to reduce the 3/4" to 5/8" (Home Depot A-493 PB225 ID BARB TO MIP ADAPTER 5/8" X 1/2") is required to reach the stock pressure valve location.
And a 6" length of 1/4" ID hose with a BRASS HOSE BARB SPLICER 1/4" X 1/4" is required to reach the stock N75 location.
See my Fotki site for pics.<ul><li><a href="http://public.fotki.com/sttewie/audi_tt_mods/samco_intake_install/">http://public.fotki.com/sttewie/audi_tt_mods/samco_intake_install/</a</li></ul>
A 10" length of 3/4" OD hose and a fitting to reduce the 3/4" to 5/8" (Home Depot A-493 PB225 ID BARB TO MIP ADAPTER 5/8" X 1/2") is required to reach the stock pressure valve location.
And a 6" length of 1/4" ID hose with a BRASS HOSE BARB SPLICER 1/4" X 1/4" is required to reach the stock N75 location.
See my Fotki site for pics.<ul><li><a href="http://public.fotki.com/sttewie/audi_tt_mods/samco_intake_install/">http://public.fotki.com/sttewie/audi_tt_mods/samco_intake_install/</a</li></ul>
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
X-Pwred225
TT (Mk1) Discussion
5
09-27-2004 07:43 PM
Ryan E.
TT (Mk1) Discussion
18
06-04-2004 08:59 AM
