tCarbon 180 FMIC Install
#13
AudiWorld Senior Member
Thread Starter
Join Date: Nov 2002
Posts: 1,415
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
it is a structural member and on a 225s is used to carry the charge air from right to left side of the car between SMICs. On 180s it does not get used for that and sits open to the outside. After 100K miles mine had collected some crap in it.
#14
AudiWorld Senior Member
Thread Starter
Join Date: Nov 2002
Posts: 1,415
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.audiworld.com/forums/images/icons/icon1.gif)
I have never had the front off before, which was actually easy, the kit did not have instructions, and I ran into the inevitable snags along the way.
I used MarTT's Fotki of the 225 version install as a guide and had a few emails back and forth with Tylor@tCarbon. What took me the longest was figuring out how to align the last 2 pieces of silicone tubing so everything would fit and where to move the horns and reroute the wiring.
I figure with some level of experience on these cars and using this guide someone could do it in 3-5 hours.
I used MarTT's Fotki of the 225 version install as a guide and had a few emails back and forth with Tylor@tCarbon. What took me the longest was figuring out how to align the last 2 pieces of silicone tubing so everything would fit and where to move the horns and reroute the wiring.
I figure with some level of experience on these cars and using this guide someone could do it in 3-5 hours.
Thread
Thread Starter
Forum
Replies
Last Post
A4Huey
A4 (B6 Platform) Discussion
6
05-28-2006 07:58 AM
DirtyVegasTT
TT (Mk1) Discussion
7
10-02-2003 01:14 PM