Dana @ Ross-Tech

Please check Adaptation Channel 17. This should be "Comfort Function" and you would want to set this to "1 = on"

Adaptation screen shot example: http://www.ross-tech.com/vcds/tour/a...on_screen.html

CSavage

Okay....I confirmed that this is indeed set to 1. I have checked that I have the "windows" section in my DIS and that it is "checked" as well. I can post the AutoScan etc if needed.

Dana @ Ross-Tech

Okay, I notice the previous post that had "Address 46:8P0 959 433 K channel 17 adapted from 1 to 0 " so I wasn't sure about that. I don't know what else to suggest.

It looks like you are a registered customer. You could create Control Module Maps of your 46 module and send them to us. I would do both Adaptation and Measuring Blocks and use Pre-label file. More info here:

http://wiki.ross-tech.com/wiki/index...ol_Module_Maps

http://www.ross-tech.com/vcds/tour/c...nnels-map.html

I would also like an Auto-Scan from the current release:

http://www.ross-tech.com/vcds/download/current.html


I can't promise a remedy but we can take a look.

wedrownis

Was there an answer on this? I am in the same boat.

wedrownis

For those with the same situation. This is what I had to do to get this to work with my car without a sunroof.

I had to program all 4 windows to work with one touch down or up. There is a tech bulleting that explains how to program the windows so they roll up and down automatically without having to hold the window up or down button. For some reason this was only coded for 2 of my windows, and when I disconnect the battery, it goes to the default of not working for any.

To program it you need to roll the window up. Then push the up button for over a second. That should code the window for that function. Test it. Once doing it for all 4 windows I was able to close and open with keyfob