Diagnose ABS control module with Vag-Com?
06-16-2004, 06:11 AM
#1
New Member
Thread Starter
Join Date: Apr 2004
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Diagnose ABS control module with Vag-Com?
I (as some other guy in this forum) have some problems with my "longitudinal acceleration sensor, G251", I tested with a sensor from a friends car and it didn't help. The DTC is still there and the ABS-warning light goes on. When I'm reading of the sensor I get a value saying that the vehicle accelerates with ~10.119ms/sec even when I'm standing still. Perhaps it's the ABS control unit that is the problem and not the sensor. Can I use Vag-Com tomake some kind of sanity check on my ABS control unit?
06-16-2004, 11:43 AM
#2
Audiworld Premium Sponsor
Join Date: Sep 2000
Posts: 2,230
Likes: 0
Received 0 Likes
on
0 Posts
06-18-2004, 06:09 PM
#4
Audiworld Premium Sponsor
Join Date: Sep 2000
Posts: 2,230
Likes: 0
Received 0 Likes
on
0 Posts
Try Basic Setting, Group 069 with
the car on a level surface.
If that doesn't fix it, then either the control module is wonked or you've got a wiring problem to the sensor.
-Uwe-
If that doesn't fix it, then either the control module is wonked or you've got a wiring problem to the sensor.
-Uwe-
__________________
http://www.Ross-Tech.com
http://www.Ross-Tech.com
Thread
Thread Starter
Forum
Replies
Last Post
Audi0s
A4 (B5 Platform) Discussion
4
07-30-2008 04:09 AM
neildiamond
A4 (B5 Platform) Discussion
4
09-19-2007 08:27 AM
dcpaul
TT (Mk1) Discussion
3
01-02-2007 02:10 PM
O-Dog
A4 (B5 Platform) Discussion
6
10-01-2005 04:21 PM
