nh

hi

had an accident and replaced the front airbags plus belts....

now i have the crash data on the ecu

done a scan with vag-com (full version)

data below....

VAG-COM Version: Release 504.1-UD

Control Module Part Number: 1T0 909 605
Component and/or Version: 04 AIRBAG VW62 0102 2112
Software Coding: 0012340
Work Shop Code: WSC 01324
10 Faults Found:
00595 - Crash Data Stored
000 - -
01214 - Crash Data for Belt Tensioner Stored
000 - -
00588 - Airbag Igniter; Driver Side (N95)
002 - Lower Limit Exceeded - Intermittent
00589 - Airbag Igniter 1; Passenger Side (N131)
001 - Upper Limit Exceeded - Intermittent
00654 - Seat Belt Tensioner Igniter; Driver Side (N153)
001 - Upper Limit Exceeded - Intermittent
00655 - Seat Belt Tensioner Igniter; Passenger Side (N154)
001 - Upper Limit Exceeded - Intermittent
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent
01312 - Powertrain Data Bus
014 - Defective - Intermittent
01317 - Control Module in Instrument Cluster (J285)
004 - No Signal/Communication - Intermittent
01589 - Igniter for Head-Airbag; Passenger Side (N252)
001 - Upper Limit Exceeded - Intermittent


my question is can i delete this data from the ecu?

thank

Theresias

Replace control module, this is mandatory after a front impact. No other way.