Speed Sensitive Volume Control (SVC)
The first thing you'll see when you power up while holding P.SCAN is "SVC _ "
This is the "Speed Sensitive Volume Control" (SVC)
Use the SEEK knob to adjust the setting. 0-5
0 - inactive
5 - most active
|
|
Turn on Volume
Hit P.SCAN once to change to the next menu.
This adjusts the volume when the stereo is turned on
Use the Seek Knob to adjust the setting 1-5
|
|
Station Sensitivity
Hit P.SCAN once to change to the next menu.
Changing the Station Scan Sensitivity
Use the SEEK knob to adjust the setting.
"SENS DX" for Distance reception when scanning
SENS LO" for Local reception when Scanning
When you select "SENS LO", it will stop only at the stations that have a stronger signal.
|
|
Radio Monitoring
Hit P.SCAN once to change to the next menu.
Listening to the radio while fast forwarding or rewinding a tape (radio monitoring).
Use the Seek knob to adjust.
ON or OFF
|
|
Navigation volume
Hit P.SCAN once to change to the next menu.
Use the SEEK knob to adjust the setting: 0-5
It only works if you have a Navigation System. (I don't, but the menu is still there).
|
|
Telephone (left or right)
Hit P.SCAN once to change to the next menu.
Use the SEEK knob to adjust the setting: L-R
It only works if you don't have the Bose system.
Hands Free speaker phone output - Left Or Right
|
|